Wathan Formula: The Exponential 1RM Model
The Wathan formula (1994) estimates your one-rep max with an exponential model: 1RM = 100 × weight ÷ (48.8 + 53.8 × e−0.075 × reps). It tracks Epley closely through the mid-rep ranges but runs a touch higher at 10+ reps — useful to know, because that optimism is exactly what you want to discount when the input set gets long.
What is the Wathan formula?

Published by Wathan in 1994 — note the spelling, it’s Wathan not “Wathen,” a mistake I see constantly — it’s one of the exponential-decay family of formulas alongside Mayhew. Instead of a straight-line relationship, it models the idea that each additional rep tells you a little less about your max than the one before it.
From 100 kg, here’s where it lands:
- 1 rep → 101.3 kg
- 5 reps → 116.6 kg
- 10 reps → 134.7 kg
- 15 reps → 150.9 kg
Compare that to Epley at the same inputs: 103.3, 116.7, 133.3, 150.0. They’re near-twins through most of the range, with Wathan running just slightly hotter at 10 and 15 reps. At 5 reps they’re functionally identical — 116.6 vs 116.7 is noise, not signal.
How does the Wathan math actually work?
The formula is 1RM = 100 × W ÷ (48.8 + 53.8 × e−0.075R), where W is weight, R is reps, and e is Euler’s number (~2.71828).
What’s happening conceptually: the denominator estimates what percentage of your max the lifted weight represents. At 1 rep, the denominator works out to about 98.7, so 100 × W ÷ 98.7 gives you just over W — the formula’s way of saying a true single is essentially your max, plus a hair. As reps climb, the e−0.075R term shrinks toward zero, the denominator approaches 48.8, and the predicted max grows. The 0.075 decay constant controls how fast the curve flattens — it’s gentler than Mayhew’s 0.055, which is why Wathan stays closer to Epley.
Yes, it’s the ugliest formula on this site to do by hand. That’s what calculators are for.
Worked example: 200 lb for 8 reps
- Weight = 200, reps = 8
- Compute the exponent: −0.075 × 8 = −0.6
- e−0.6 = 0.5488
- Denominator: 48.8 + 53.8 × 0.5488 = 48.8 + 29.53 = 78.33
- 100 × 200 ÷ 78.33 = 255.33
- Estimated 1RM: 255.3 lb
And a second one, because one example never tells the whole story: 185 lb for 6 reps.
- −0.075 × 6 = −0.45; e−0.45 = 0.6376
- Denominator: 48.8 + 53.8 × 0.6376 = 48.8 + 34.30 = 83.10
- 100 × 185 ÷ 83.10 = 222.62
- Estimated 1RM: 222.6 lb
Where does Wathan shine?
The 5–10 rep range. This is Wathan’s home turf. It was built for exactly the rep ranges most lifters actually test in, and it behaves well there — no weird spikes, no fantasy numbers, just a solid estimate that agrees with the field.
As a second opinion on Epley. Because the two formulas are built on completely different math but land in nearly the same place through the mid-range, agreement between them is genuinely reassuring. If Epley says 262.5 and Wathan says 262.3 (that’s 225 × 5, by the way), you can be pretty confident the truth is nearby.
Where does it struggle?
It runs a little hot at high reps. At 15 reps Wathan predicts 150.9 from 100 kg where Lombardi says 131.1. The exponential decay doesn’t flatten aggressively enough for very high-rep sets, so treat 12+ rep estimates with the same skepticism you’d give any formula that far from a single.
Slightly optimistic at 1 rep. Predicting 101.3 from a 100 kg single is a small thing, but a formula probably shouldn’t tell you your max exceeds a weight you just lifted once. Minor, but worth knowing.
How does Wathan compare to Epley and Brzycki?
At 5 reps from 100 kg: Epley 116.7, Wathan 116.6, Brzycki 112.5. Wathan sides with Epley here.
At 10 reps: Epley and Brzycki both say 133.3 (they’re identical at exactly 10), Wathan says 134.7 — about a kilo and a half higher. Trivial in practice.
At 15 reps: Brzycki 163.6, Wathan 150.9, Epley 150.0. Wathan and Epley converge again at the top end while Brzycki runs away. If I had to rank the 15-rep predictions by plausibility, Wathan/Epley tie for the sensible middle, Lombardi is the conservative anchor at 131.1, and Brzycki is off in fantasyland.
Bottom line: Wathan is a quality formula that doesn’t get the attention Epley and Brzycki do, mostly because it’s harder to do on a napkin. The math being ugly doesn’t make the answers wrong.
Frequently asked questions
Is it Wathan or Wathen?
Wathan. The “Wathen” spelling is everywhere online and it’s wrong — the formula is credited to Wathan (1994). If you see “Wathen formula” on a calculator site, the math is probably still right, but the name isn’t.
Is the Wathan formula accurate?
In the 3–10 rep range, yes — it agrees closely with Epley, which is the most widely validated of the simple formulas. Above 12 reps it trends optimistic, so cap your test sets at 10 or fewer for the best results.
Why is Wathan so complicated compared to Epley?
Because it’s modeling a curve instead of a line. Epley’s 1 + r/30 is beautifully simple; Wathan’s exponential decay fits the underlying physiology a bit more faithfully at the cost of being impossible to do in your head. In the calculator age, that’s a fine trade.
Should I use Wathan or Epley?
For most purposes it barely matters — at 5 reps they differ by 0.1 kg. Use both and look at the consensus. If they disagree meaningfully, your test set was probably too high-rep, and that’s the real problem to fix.
Sources
- LeSuer, D.A., et al. (1997). The accuracy of prediction equations for estimating 1-RM performance in the bench press, squat, and deadlift. Journal of Strength and Conditioning Research, 11(4), 211–213.
Learn more







