One Rep Max Conversion Chart: Weight × Reps to 1RM
Find the weight you lifted in the left column, your reps across the top, and read your estimated 1RM where they meet. Every number below comes from the Epley formula — the most widely used 1RM equation in strength training. Example: 225 lb for 5 reps converts to a 263 lb estimated max.
How do I read this chart?

Three steps, that’s it. Step one: find the row closest to the weight you actually lifted — these are working weights, the loaded bar you moved, not your bodyweight. Step two: slide across to the column matching how many clean reps you did. Step three: read the number. That’s your estimated one rep max.
Two things to keep straight. First, the reps column means reps you completed with good form — not reps you think you might have gotten. Second, if your exact weight isn’t listed, use the nearest row; the difference between adjacent rows is small enough that it won’t change any training decision you’d make.
1RM conversion chart (Epley formula)
| Weight lifted | 1 rep | 2 reps | 3 reps | 4 reps | 5 reps | 6 reps | 8 reps | 10 reps |
|---|---|---|---|---|---|---|---|---|
| 135 lb | 140 | 144 | 149 | 153 | 158 | 162 | 171 | 180 |
| 155 lb | 160 | 165 | 171 | 176 | 181 | 186 | 196 | 207 |
| 185 lb | 191 | 197 | 204 | 210 | 216 | 222 | 234 | 247 |
| 205 lb | 212 | 219 | 226 | 232 | 239 | 246 | 260 | 273 |
| 225 lb | 233 | 240 | 248 | 255 | 263 | 270 | 285 | 300 |
| 275 lb | 284 | 293 | 303 | 312 | 321 | 330 | 348 | 367 |
| 315 lb | 326 | 336 | 347 | 357 | 368 | 378 | 399 | 420 |
Bookmark this page — it’s the fastest way to convert any gym set into a max without touching a calculator.
Which formula is this chart based on?
The Epley formula, published by Boyd Epley in 1985: 1RM = weight × (1 + reps/30). I picked it for one reason — it’s the most widely used 1RM equation in existence. It’s the default in most apps, most textbooks, and the NSCA’s materials. When two lifters compare estimated maxes, Epley is usually the common language.
It’s not the only option. Matt Brzycki’s 1993 formula — 1RM = weight × 36/(37 − reps) — is the other big one, and the two agree exactly at 10 reps (100 kg × 10 gives 133.3 kg on both) while drifting apart everywhere else. Epley runs slightly hotter at higher rep counts. If you want the conservative number, run Brzycki; if you want the number everyone else is quoting, it’s this chart.
How accurate are these conversions?
It depends almost entirely on which column you’re reading from. The 1–5 rep columns are the trustworthy ones — Reynolds et al. (2006) found the 5-rep max the single most accurate predictor tested, with an R² of 0.993 on bench press. The closer your test set is to a single rep, the less guessing the formula has to do.
The 8 and 10-rep columns are softer. Past about 10 reps, the set starts measuring muscular endurance as much as maximal strength, and every formula loosens up. A 10-rep conversion is a reasonable ballpark, not a promise. And one honest caveat from LeSuer et al. (1997): every formula they tested underestimated the deadlift by 9–14%, so if you’re converting a deadlift set, expect your real pull to beat the chart.
Bottom line: columns 1–6 are numbers you can program off. Columns 8–10 are numbers you can plan off. There’s a difference, and now you know where it sits.
Can I work backward from my 1RM?
Yes — that’s the chart’s second job, and honestly the more useful one for programming. Two ways to do it.
Method one: reverse lookup. Say your tested max is around 365 lb. Scan the table body for the nearest number — 275 lb × 5 reps gives 321… no, keep scanning — 315 lb × 5 gives 368. Close enough. So a clean set of 315 for 5 tells you you’re in 365 territory. Useful when you want to check progress without maxing out.
Method two: percentages. Take your max, multiply by the training percentage you want. Max of 400 and you need 80%? That’s 320 lb. Want your 90% training max (the 5/3/1 standard)? 360 lb. Then find the closest row and pick a rep column to build the set. The chart handles the weight-to-max direction; simple multiplication handles max-to-weight.
Combine them and you never guess loads again: test or estimate the max, convert it down to working weights, and run your program off numbers instead of feelings.
Should you round the number up or down?
Down. Almost always down — and this is one of those small habits that separates lifters who progress from lifters who stall.
The chart gives you exact numbers like 263 or 347, but barbells don’t work that way. Plates come in fixed jumps, so you’ll always be rounding to something loadable. The rule: round down for max attempts, round to nearest for programming. If the chart says your max is 263 and you’re testing, load 260, not 265. If it’s a training percentage calling for 212, 210 is fine.
Why the conservatism? Because every conversion carries error bars, and the error only punishes you in one direction. An estimate that’s 5 lb high costs you a missed lift and a wrecked session; an estimate that’s 5 lb low costs you nothing — you’ll just lift it, feel strong, and adjust up next time. The barbell rewards humility. Round down, make the lift, live to progress.
Conversion chart questions
Why does this chart differ from another calculator?
Different formulas, different assumptions. This chart uses Epley; another tool might use Brzycki (which runs a touch lower past 5 reps) or factor in RIR. A few pounds of spread between calculators is normal — it’s different math, not different truth.
Can I use this chart for dumbbells?
Yes, with one rule: be consistent about what “weight lifted” means. For two-dumbbell lifts, use the combined weight of both dumbbells to find your row. For single-arm work, use the single dumbbell’s weight. The formula doesn’t care what you’re holding.
Does the chart work in kilograms?
The printed numbers are pounds, but the Epley math is unit-agnostic — it works identically in kg. Either divide your target by 2.2 and read the chart, or run the formula directly: 1RM = weight × (1 + reps/30). A 100 kg × 5 set, for example, converts to 116.7 kg.
What if my reps aren’t on the chart?
Run the formula yourself — it takes ten seconds. 1RM = weight × (1 + reps/30). Example: 200 lb × 7 reps → 200 × (1 + 7/30) → 200 × 1.233 → about 247 lb. The chart covers the common cases; the formula covers everything else.
Can I convert reps to max with this chart?
Yes. Find your weight and rep count in the table and read across to your estimated one rep max. That reps-to-max conversion uses the Epley formula, so it matches the main calculator for sets of 10 reps or fewer.
Sources
- LeSuer, D.A. et al. (1997). “The accuracy of prediction equations for estimating 1-RM performance in the bench press, squat, and deadlift.” Journal of Strength and Conditioning Research, 11(4). doi:10.1519/1533-4287(1997)011<0211:TAOPEF>2.3.CO;2
- Reynolds, J.M. et al. (2006). “Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry.” Journal of Strength and Conditioning Research, 20(3). doi:10.1519/R-17094.1
- Haff, G.G. & Triplett, N.T. (Eds.). Essentials of Strength Training and Conditioning (4th ed.). NSCA / Human Kinetics.







