Lander Formula: The 1RM Equation Between Epley and Brzycki

The Lander formula estimates your one-rep max with a simple linear equation: 1RM = 100 × weight ÷ (101.3 − 2.67123 × reps). It usually lands between Epley (the optimist) and Brzycki (the conservative) — making it a solid middle-ground choice when you want one honest number.

What is the Lander formula?

lander formula
lander formula

Published in 1985, the Lander equation is one of the seven classic 1RM prediction formulas tested in the research literature. It’s a linear model, meaning it assumes each additional rep costs you a fixed percentage of your max — no curves, no exponentials, just a straight-line relationship.

The formula:

1RM = 100 × Weight ÷ (101.3 − 2.67123 × Reps)

That denominator does the real work. As your rep count climbs, the denominator shrinks, and the estimated max grows. The 2.67123 constant is what Lander’s data said each rep is “worth” — roughly 2.6% of your max per rep.

How do you use it? (Worked example)

Let’s run 100 kg for 5 reps:

1RM = 100 × 100 ÷ (101.3 − 2.67123 × 5)
= 10,000 ÷ (101.3 − 13.356)
= 10,000 ÷ 87.944
= 113.7 kg

In pounds: 225 lb for 5 reps gives 22,500 ÷ 87.944 = 255.8 lb.

Compare that to the same set through the other two linear formulas: Epley says 262.5 lb, Brzycki says 253.1 lb. Lander’s 255.8 sits almost exactly between them — which is its whole personality in one number.

Where does Lander sit vs Epley and Brzycki?

Here’s 100 kg across rep ranges, all three formulas:

RepsEpleyLanderBrzycki
1103.3101.4100.0
3110.0107.2105.9
5116.7113.7112.5
8126.7125.1124.1
10133.3134.1133.3
12140.0144.4144.0
15150.0163.3163.6

Notice the pattern: at low reps Lander runs between the two (Epley’s the highest, Brzycki the lowest). Around 10 reps all three converge — that crossover zone where the linear formulas agree. Past 12 reps they scatter, and honestly, none of them should be trusted up there anyway.

What happens at very low and very high reps?

Every formula has a range where it behaves and a range where it embarrasses itself. Lander’s honest zone is roughly 2–10 reps — same as the other linear formulas.

At a true single (1 rep), Lander predicts 101.4 from a 100 kg single — a 1.4% overshoot. That’s the formula admitting its own imperfection: if you actually lifted 100 for 1, your max is 100, not 101.4. Epley overshoots more (103.3); Brzycki is dead honest (100.0). This tells you something useful about each formula’s personality — Brzycki trusts the single, Epley inflates it, Lander splits the difference again.

At 15 reps, Lander says 163.3 — nearly identical to Brzycki’s 163.6, while Epley lags at 150.0. Past 12 reps, though, you’re in fantasy territory with any of them. A 15-rep set measures muscular endurance and pain tolerance as much as strength; no linear equation can untangle that. If your test set was 12+ reps, retest heavier instead of trusting the math.

How do you actually program off a Lander estimate?

Say Lander gives you 113.7 kg from a 100 × 5 set. Don’t train off 113.7 — train off 90% of it (the training-max concept from 5/3/1): roughly 102 kg. Your working sets then become percentages of 102, not 113.7.

This two-step process — estimate, then discount — is how experienced lifters use every formula. The estimate tells you where your ceiling probably is; the training max tells you where to actually work. Skipping the discount step is how people end up grinding at 95% of an inflated estimate and wondering why they stall.

For the full framework, our training and programming guide walks through turning any 1RM number into a working plan.

When should you use the Lander formula?

I’ll be straight with you: Lander isn’t the most famous formula, and there’s a reason Epley and Brzycki get the headlines. But Lander earns its spot in two situations.

When you want a single compromise number. If Epley feels too generous and Brzycki too stingy, Lander splits the difference. For programming training weights off an estimate, that middle ground is often the most usable number — aggressive enough to drive progress, conservative enough to keep you safe.

When you’re comparing across formulas. Our 7-formula comparison shows how the equations diverge. Lander is the tiebreaker vote — if Epley and Brzycki disagree by 10 lb and Lander lands in the middle, you’ve got a consensus range instead of a coin flip.

What Lander won’t do: it won’t fix a bad test set. Feed it 15 sloppy reps and you’ll get a confident-looking wrong answer, same as every other formula. Keep test sets in the 3–8 rep range and the number means something.

Frequently Asked Questions

Is the Lander formula accurate?

It’s in the same accuracy band as the other linear formulas — solid for 3–8 rep sets, increasingly speculative past 10. LeSuer et al. (1997) tested seven equations and found all correlated strongly (r > 0.95) with actual maxes, with no single formula dominating across every lift.

Why is it called a “linear” formula?

Because each rep subtracts a fixed amount (2.67123) from the denominator — a straight-line relationship between reps and estimated max. Contrast that with Lombardi’s exponential curve, where each rep costs progressively more.

Should I use Lander instead of Epley?

Use both and compare. Epley runs a little hot, Lander runs middle, Brzycki runs cool. Looking at where two or three land together beats trusting any single one — that’s the whole point of comparing formulas instead of marrying one.

Does Lander work for deadlift?

With the standard deadlift caveat: LeSuer 1997 found every formula underestimated the deadlift by 9–14%. Expect your real pull to run above Lander’s number, same as with any other equation. Read our accuracy guide for the full picture.

Why haven’t I heard of the Lander formula before?

Because Epley and Brzycki won the popularity contest — they’re simpler to remember and got embedded in apps early. Lander is the quiet middle child: slightly more accurate as a compromise in some comparisons, but nobody’s marketing department picked it up. That doesn’t make it worse; it makes it underrated.

Sources

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *